RTD'S
Resistance Temperature Detectors (RTDs) are temperature sensing devices consisting of a wire coil or deposited film of pure metal. The element’s resistance increases with temperature in a known and repeatable manner.
Large Call to Action Headline
PRODUCT LINES
Adjustable Bayonet Style RTD's
-3/16" diameter stainless steel probe
-Operating temp. 392°F (200°C); 900°F (482°C) available
-3-wire circuit
-100 ohms Class B element per IEC 751
-Can be installed wherever existing thermocouples of similar design are used
Compression Fitting RTD's
-3/16" diameter stainless steel probe
-Operating temp. 392°F (200°C); 900°F (482°C) available
-One-time adjustable 1/8"-27 NPT brass compression fitting
-3-wire circuit
-100 ohms Class B element per IEC 751
-Can be installed wherever existing thermocouples of similar design are used
Melt Bolt RTD's
-3/16" diameter Probe
-100 ohm Class B element per IEC 751
-3-wire circuit
-Can be installed wherever standard melt thermocouples are used
-Operating temp. 392°F (200°C), 900°F (482°C) available
-Available in 3" and 6" bolt designs
-Bolts and Probes are 300 series stainless steel
Rigid Bayonet Style RTD's
-3/16" diameter stainless steel probe
-Operating temp. 392°F (200°C); 900°F (482°C) available
-3-wire circuit
-100 ohms Class B element per IEC 751
-Can be installed wherever existing thermocouples of similar design are used
Style RTM with Transmitter & Connection Head
-100 ohm RTD
-4-20mA Programmable Linear Output Transmitter
-Available with Spring-Loaded Sheath
-Temperature Range of -58°F to 500°F (-50° to 260°C)
-Transmitter Accuracy of +/-0.2% of temperature span
-For field programming of the temperature transmitter see Part Number ETM90006
-Available in Single 3-wire Circuit only
-1/2" NPT process connection
Style RTS Sanitary RTD's
-Platinum Resistance Element
-Ideal for Food and Dairy Applications
-316 SS Construction
-Available in Standard .250 dia. Tip or Optional .500 dia. Reduced to .250 dia.
-Improved Response Time
-Welded and Highly Polished Components
-Operating Temperature Range of -58° to 500°F (-50° to 260°C)
Style RTD1
Straight Probe
-Platinum Resistance Element
-Two Construction Styles to Suit Any Application:
Tube & Wire or Mineral Insualated
Style RTD2
Plug or Jack Termination
-Platinum Resistance Element
-Available with standard or mini, 2- or 3-prong plug or jack
-Two Construction Styles to Suit Any Application
Style RTD3
Open Disc Termination
-Platinum Resistance Element
-Ceramic disc 1-1/8" O.D. for 2-, 3- and 4-wire designs, 2-1/32" O.D. for dual 6-wire design (.188" and .250" O.D. sheath); consult factory for 1/8" sheath O.D.
-Two Construction Styles to Suit Any Application
Style RTD4
Process Connection
-Platinum Resistance Element
-Designed for mounting to connection head and thermowells
-Optional spring loading on 1/2" NPT only
-Stainless Steel fittings with 1/4" or 1/2" NPT thread
-Two Construction Styles to Suit any Application
Style RTD5
Handheld Probe
-Platinum Resistance Element
-Ground conical point for easy meat penetration
-Large handle makes penetration and removal easy
-Three Construction Styles to Suit any Application
Style RTD6
-Connection Head with optional Compression Fitting
-Platinum Resistance Element in single or dual circuit.
-connection heads are gasketed to seal against moisture, dust and corrosive or hostile atmospheres.
-Screw covers are attached to body with a stainless steel chain and screws.
- connection heads are available in die cast aluminum, cast iron, stainless steel and Bakelite. Explosion proof heads are also available in aluminum and stainless steel.
-Two Construction Styles to Suit Any Application
Style RTD7
Connection Head with 1/2" NPT Hex Nipple
-Platinum Resistance Element.
-Gasketed to seal against moisture, dust and corrosive or hostile atmospheres.
-Screw covers are attached to body with a plated chain.
-Covers have lugs for tightening or loosening with a screwdriver or wrench.
-Available in single or duplex.
-Available in die cast aluminum, Bakelite and cast iron in a variety of sizes from miniature for confined areas, to the large universal head designed for heavy process and industrial applications. See Sensor Accessories for complete details.
-Two Construction Styles to Suit Any Application
Style RTD8
Connection Head with 1/2" NPT Pipe Nipple
-Platinum Resistance Element.Gasketed to seal against moisture, dust and corrosive or hostile atmospheres.
-Screw covers are attached to body with a plated chain.
-Covers have lugs for tightening or loosening with a screwdriver or wrench.
-Available in single or duplex.
-Available in die cast aluminum, Bakelite and cast iron in a variety of sizes from miniature for confined areas, to the large universal head designed for heavy process and industrial applications. See Sensor Accessories for complete details.
✴ Pipe Nipple is galvanized.
-Two Construction Styles to Suit Any Application
Style RTD9
Connection Head with 1/2" NPT Nipple, Union, Nipple
-Platinum Resistance Element.
-Gasketed to seal against moisture, dust and corrosive or hostile atmospheres.
-Screw covers are attached to body with a plated chain.
-Covers have lugs for tightening or loosening with a screwdriver or wrench.
-Available in single or duplex.
-Available in die cast aluminum, bakelite and cast iron in a variety of sizes from miniature for confined areas, to the large universal head designed for heavy process and industrial applications. See Sensor Accessories for complete details.
✴ Nipple-Union-Nipple is galvanized.
-Two Construction Styles to Suit Any Application
Copyright Advance Industrial 2023 - All Rights Reserved